WELCOME!

It is hard to believe that it was almost ten years ago I witnessed a CNC router in action for the very first time. I was fascinated and simply had to have one! Although I had been in the creative end of the three dimensional sign business for most of my life I didn't really know what I would do with one of these machines - but I just knew it could do fantastic stuff.

Along with the CNC router I discovered the wonderful material called Precision Board and the glues, primers and other companion products they offer. Since then we have gone through many tons of the material using it in most signs and projects we tackle. This journal will chronicle our many adventures both past, present and future. I'll talk from the perspective of someone who pushes these products to the creative limit on a daily basis. I'll be adding to the stories two or three times each week. -dan

Saturday, February 4, 2017

It's a Bug Whirled

We've begun production on a series of imaginative dimensional signs for a new theme park client. They asked us to be a little out there and we happily complied. The first is for a small spinning coaster. The feature/sign will sit inside one of the loops of the ride and needed to be large so it didn't get lost. We drew up the design which was approved.


To better get a handle on the final design and also work out the construction details we decided to build a detailed massing model at the scale of one inch equals one foot. The model worked out to be twenty inches tall. This makes the finished piece twenty feet tall. The realities of the ride safety envelope meant we had to scale down the stump diameter a little. 



The structure will be built in three sections to facilitate shipping it legally on the road. The first break will happen between the drum top and the bug's feet. To make for a good and strong connection we cut two rings of half inch plate steel. The accuracy of the MultiCam CNC plasma cutter ensured things line up perfectly. These were bent slightly to match the model and then the rings were bolted together. We then welded the amateur below it. A stand (the a matching bend) was also fabricated to transport the top portion to the site.

The structural steel frame and bracing is all heavy square tubing. I then welded a sub frame using lighter one inch square tubing which was followed by a hand formed pencil rod grid to form the armature. By the time the upper portions of the armature are welded there will be more than a kilometre of steel in this piece.